|
|

FS98O24 (OTP Type)
General Description
The FS98O24 is an 8-bit RISC-like microcontroller with 4k x 16 bits OTP program memory, auto range DMM function network, one 14-bit fully differential input analog to digital converter, two low noise amplifiers, and 4 COM x 20 SEG LCD driver. The FS98O24 is best suitable for applications such as 3 3/4 DMM and other measurement instrument products.
Feature
• | An 8-bit microcontroller with 37 single word instructions | • | Embedded 4k x 16 bits One-Time-Programmable(OTP) program memory | • | 256-byte data memory (SRAM) | • | 6-level deep stacks | • | Embedded 1.0 MHz oscillator | • | External 32768Hz (RTC) or 4MHz crystal oscillator | • | Embedded Low Voltage Reset (LVR) and Low Voltage Detector (LVD) [3 mode: <2.3V, <3.5V, ADP2] | • | Dual 24-bit Programmable counter | • | 8-bit Frequency Synthesizer | • | 16-bit bi-directional I/O port | • | Buzzer output | • | 4 x 20 LCD drivers | • | UART | • | Two low noise amplifier | • | One 14-bit ADC with programmable output rate and resolution (10-bit/320Hz~14-bit/5Hz) | • | Two low noise (1gV Vpp without chopper, 0.5gV Vpp with chopper, 0.1Hz~1Hz) OPAMP with chopper controller | • | 7 Interrupt sources (external: 3, internal: 4) | • | Embedded charge pump (Voltage Doubler) and voltage regulator (3.6V regulated output) | • | Embedded bandgap voltage reference (typical 1.16V50mV, 100ppm/ XC) | • | Internal silicon temperature sensor (typical 550gV50gV/ XC) | • | Watchdog timer (WDT) | • | Package: 100-pin QFP |
Application
• | 3 3/4 auto-range DMM | • | Measurement instrument | • | Digital meter |
|
|
|
|
|